From: Paul H. Hargrove (PHHargrove_at_lbl_dot_gov)
Date: Wed Jul 25 2007 - 08:51:44 PDT
Neal Becker wrote: > On Wednesday 25 July 2007, Paul H. Hargrove wrote: > >> Neal Becker wrote: >> >>> I tried rpmbuild on fedora f7 x86_64, and got this: >>> >>> if test -n "_depmod"; then /usr/bin/gmake _depmod; fi >>> gmake[3]: Entering directory `/home/nbecker/RPM/BUILD/blcr-0.6.0_b1' >>> ERROR: 'depmod' check FAILED (rc=1) >>> cr_depmod: is_file_shm_hugepages unresolved in blcr.ko >>> gmake[3]: *** [_depmod] Error 1 >>> >> Neal, >> >> This is, I think, resolved by the patch Cedric Le Goater posted to the >> list. If you missed it, the message is archived here: >> http://www.nersc.gov/hypermail/checkpoint/0611.html . Once past this >> problem, please let me know if you experience the insmod-time failure >> that Cedric reported in that same message. >> >> -Paul >> > > Building srpm on fedora f7 x86_64: > > configure: >>>> BEGIN sub-configure for 32-bit libs >>>> > configure: /home/nbecker/RPM/BUILD/blcr-0.6.0_b1/configure '--srcdir=/home/nbecker/RPM/BUILD/blcr-0.6.0_b1' '--build=i686-linux' '--libdir=/usr/lib' --with-components=libcr,tests,examples '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-config-report' 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -mtune=generic' 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -mtune=generic' 'CC=gcc -m32' 'CXX=g++ -m32' > checking for a BSD-compatible install... /usr/bin/install -c > checking whether build environment is sane... yes > checking for gawk... gawk > checking whether make sets $(MAKE)... yes > configure: error: source directory already configured; run "make distclean" > there first > configure: error: --enable-multilib requested but FAILED sub-configure for > 32-bit libs > make: *** [config.status] Error 1 > error: Bad exit status from /var/tmp/rpm/rpm-tmp.92347 (%build) > Pretty sure I understand the source of the problem, but need some time to work up a solution. The problem is that --enable-multilib is only going to work with a VPATH build (one in which the build directory and source directory are different) because the multilib setup involves running configure twice. If builddir==srcdir then the second run of configure will die as shown above (autoconf version dependent, because I can build from srpm on my own x86_64 system). For a tarball build, I can document this fact, and/or have configure give a more useful error message with instructions for doing a VPATH build. For the srpm case, however, I am going to have to play games because the rpm %configure macro wants to run ./configure (assumes/forces srcdir==builddir). You can expect a fix from me later today if things go well. The fix will probably come as a second beta, rather than a patch. -Paul -- Paul H. Hargrove PHHargrove_at_lbl_dot_gov Future Technologies Group HPC Research Department Tel: +1-510-495-2352 Lawrence Berkeley National Laboratory Fax: +1-510-486-6900