Re: Some failures in 0.8.0b1

From: Neal Becker (ndbecker2_at_gmail.com)
Date: Mon Dec 01 2008 - 18:11:20 PST

  • Next message: Paul H. Hargrove: "Re: Some failures in 0.8.0b1"
    On Monday 01 December 2008, Paul H. Hargrove wrote:
    > Thanks, Neil.
    >
    > When you have a chance, please see if the 1-line change below fixes the
    > prctl failure.
    > I believe the test was placing itself into SECCOMP mode and thus getting
    > killed when it tried to do much of anything.
    > In other words, the bug is probably in the test itself.
    >
    > -Paul
    >
    > --- tests/prctl.c       1 Dec 2008 00:42:20 -0000       1.4
    > +++ tests/prctl.c       2 Dec 2008 01:34:43 -0000
    > @@ -96,7 +96,7 @@
    >         /* Not safe to change this one */
    >         {"PR_GET_ENDIAN", my_type_int_ptr, PR_GET_ENDIAN, PR_SET_ENDIAN,
    > X, X, },
    >  #endif
    > -#if defined(PR_GET_SECCOMP)
    > +#if defined(PR_GET_SECCOMP) && 0
    >         {"PR_GET_SECCOMP", my_type_int, PR_GET_SECCOMP, PR_SET_SECCOMP,
    > 1, 0, },
    >  #endif
    >  #if defined(PR_GET_TSC)
    >
    ...
    
     sh RUN_ME 
    PASS: atomics
    PASS: cr_run
    PASS: cr_targ
    PASS: cr_targ2
    PASS: cr_omit
    PASS: dlopen
    PASS: bug2003
    PASS: run_on
    PASS: save_exe
    PASS: save_priv
    PASS: save_share
    PASS: save_all
    PASS: reloc_exe
    PASS: reloc_file
    PASS: reloc_fifo
    PASS: reloc_dir
    PASS: reloc_all
    PASS: clobber
    PASS: stage0001.st
    PASS: stage0002.st
    PASS: stage0003.st
    PASS: stage0004.st
    PASS: critical_sections.st
    PASS: replace_cb.st
    PASS: failed_cb.st
    PASS: failed_cb2.st
    PASS: pid_in_use.st
    cs_enter_leave: 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
    PASS: cs_enter_leave.st
    cs_enter_leave2: 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
    PASS: cs_enter_leave2.st
    cr_tryenter_cs: 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
    PASS: cr_tryenter_cs.st
    PASS: stopped.st
    Detected 3 failures in /usr/libexec/blcr-testsuite/./ptrace.st:
    000 Process started with pid 32211
    001 ptrace child 32212 is READY
    002 ptrace parent 32213 is READY
    #ST_ALARM:10
    003 cr_checkpoint(32212, "") exited with expected status 2360
    #ST_ALARM:10
    004 cr_checkpoint(32212, "--ptraced-error") exited with expected status 2360
    #ST_ALARM:10
    005 cr_checkpoint(32213, "") exited with expected status 2361
    #ST_ALARM:10
    006 cr_checkpoint(32213, "--ptracer-error") exited with expected status 2361
    #ST_ALARM:10
    007 cr_checkpoint(32212, "--ptraced-skip") exited with expected status 3
    #ST_ALARM:10
    008 cr_checkpoint(32212, "--ptracer-skip") exited with expected status 2360
    #ST_ALARM:10
    009 cr_checkpoint(32213, "--ptraced-skip") exited with expected status 2361
    #ST_ALARM:10
    010 cr_checkpoint(32213, "--ptracer-skip") exited with expected status 3
    #ST_ALARM:10
    011 cr_checkpoint(32213, "--ptraced-allow") exited with expected status 2361
    #ST_ALARM:10
    !!! Alarm clock expired
    !!! Missing final DONE
    !!! Test killed unexpectedly by signal 9
    FAIL: ptrace.st
    PASS: edeadlk.st
    PASS: pid_restore.st
    PASS: simple.ct
    PASS: simple_pthread.ct
    PASS: cwd.ct
    PASS: dup.ct
    PASS: filedescriptors.ct
    PASS: pipe.ct
    PASS: named_fifo.ct
    PASS: cloexec.ct
    PASS: get_info.ct
    PASS: orphan.ct
    PASS: overlap.ct
    PASS: child.ct
    PASS: mmaps.ct
    No hugetlbfs mount point found (test skipped)
    SKIP: hugetlbfs.ct
    PASS: readdir.ct
    PASS: dev_null.ct
    PASS: cr_signal.ct
    PASS: linked_fifo.ct
    PASS: sigpending.ct
    PASS: dpipe.ct
    PASS: forward.ct
    PASS: hooks.ct
    PASS: math.ct
    PASS: sigaltstack.ct
    PASS: prctl.ct
    ======================
    1 of 58 tests failed
    (1 tests were not run)
    ======================
    

  • Next message: Paul H. Hargrove: "Re: Some failures in 0.8.0b1"